SearchVirtual Issue on Films and Coatings (2018–2020)
-
Review of the fatigue behavior of hard coating–ductile substrate systems
2021, vol. 28, no. 1, pp. 46-55. doi: 10.1007/s12613-020-2203-0
-
In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications
2021, vol. 28, no. 1, pp. 168-178. doi: 10.1007/s12613-020-2072-6
-
Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C
2020, vol. 27, no. 11, pp. 1536-1550. doi: 10.1007/s12613-020-2014-3
-
Modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films
2020, vol. 27, no. 10, pp. 1371-1378. doi: 10.1007/s12613-020-1982-7
-
Surface treatment of titanium dental implant with H2O2 solution
2020, vol. 27, no. 9, pp. 1281-1286. doi: 10.1007/s12613-020-2016-1
-
Microstructure and properties of a wear resistant Al–25Si–4Cu–1Mg coating prepared by supersonic plasma spraying
2020, vol. 27, no. 9, pp. 1287-1294. doi: 10.1007/s12613-019-1950-2
-
-
Formation of interfacial Al−Ce−Cu−W amorphous layers in aluminum matrix composite through thermally driven solid-state amorphization
2020, vol. 27, no. 7, pp. 970-979. doi: 10.1007/s12613-019-1952-0
-
Electrodeposition of functionally graded Ni−W/Er2O3 rare earth nanoparticle composite film
2020, vol. 27, no. 6, pp. 818-829. doi: 10.1007/s12613-019-1953-z
-
-
-
-
Influence of glycine additive on corrosion and wear performance of electroplated trivalent chromium coating
2020, vol. 27, no. 4, pp. 544-554. doi: 10.1007/s12613-020-1975-6
-
-
Characterization and corrosion studies of ternary Zn–Ni–Sn alloys
2020, vol. 27, no. 1, pp. 74-82. doi: 10.1007/s12613-019-1888-4
-
Ordering and disordering of in situ grown MgAl-layered double hydroxide and its effect on the structural and corrosion resistance properties
2019, vol. 26, no. 12, pp. 1570-1577. doi: 10.1007/s12613-019-1844-3
-
Reliability evaluation of hardness test methods of hardfacing coatings with hypoeutectic and hypereutectic microstructures
2019, vol. 26, no. 12, pp. 1585-1593. doi: 10.1007/s12613-019-1866-x
-
Electroplating of Ni/Co–pumice multilayer nanocomposite coatings: Effect of current density on crystal texture transformations and corrosion behavior
2019, vol. 26, no. 10, pp. 1299-1310. doi: 10.1007/s12613-019-1833-6
-
-
-
Hot-corrosion behavior of Cr2O3-CNT-coated ASTM-SA213-T22 steel in a molten salt environment at 700℃
2019, vol. 26, no. 3, pp. 337-344. doi: 10.1007/s12613-019-1742-8
-
Preparation of rare-earth-modified medical stone powders and their application as conductive fillers
2019, vol. 26, no. 2, pp. 260-266. doi: 10.1007/s12613-019-1731-y
-
Magnetic separation of pentlandite from serpentine by selective magnetic coating
2019, vol. 26, no. 1, pp. 1-10. doi: 10.1007/s12613-019-1704-1
-
CaCO3 film synthesis from ladle furnace slag:morphological change, new material properties, and Ca extraction efficiency
2018, vol. 25, no. 12, pp. 1447-1456. doi: 10.1007/s12613-018-1699-z
-
Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition
2018, vol. 25, no. 11, pp. 1335-1343. doi: 10.1007/s12613-018-1687-3
-
Effect of Al2O3 and Y2O3 on the corrosion behavior of ZrO2-benzotriazole nanostructured coatings applied on AA2024 via a sol-gel method
2018, vol. 25, no. 11, pp. 1344-1353. doi: 10.1007/s12613-018-1688-2
-
Preparation and performance of a cold gas dynamic sprayed high-aluminum bronze coating
2018, vol. 25, no. 11, pp. 1354-1361. doi: 10.1007/s12613-018-1689-1
-
Wear and corrosion resistance of laser-cladded Fe-based composite coatings on AISI 4130 steel
2018, vol. 25, no. 6, pp. 716-728. doi: 10.1007/s12613-018-1619-2
-
Effects of intermediate Ni layer on mechanical properties of Al–Cu layered composites fabricated through cold roll bonding
2018, vol. 25, no. 5, pp. 573-583. doi: 10.1007/s12613-018-1604-9
-
Characterization and in-situ formation mechanism of tungsten carbide reinforced Fe-based alloy coating by plasma cladding
2018, vol. 25, no. 4, pp. 439-443. doi: 10.1007/s12613-018-1589-4
-
Effect of TiO2 nanoparticles on hydrogen evolution reaction activity of Ni coatings
2018, vol. 25, no. 4, pp. 472-479. doi: 10.1007/s12613-018-1593-8
-
Formation of microstructural features in hot-dip aluminized AISI 321 stainless steel
2018, vol. 25, no. 2, pp. 190-198. doi: 10.1007/s12613-018-1562-2
-
Influence of Ag content on the microstructure, mechanical, and tribological properties of TaVN-Ag films
2018, vol. 25, no. 1, pp. 110-115. doi: 10.1007/s12613-018-1553-3
Submit Manuscript
E-mail alert
RSS
