Virtual Issue on Welding (2018–2020)
-
Microstructure and mechanical properties of friction welded carbon steel (EN24) and nickel-based superalloy (IN718)
2021, vol. 28, no. 1, pp. 111-119. doi: 10.1007/s12613-020-2008-1
-
Microstructure and mechanical properties of ultralow carbon high-strength steel weld metals with or without Cu−Nb addition
2021, vol. 28, no. 1, pp. 120-130. doi: 10.1007/s12613-020-2159-0
-
Influence of welding speed on microstructure formation in friction-stir-welded 304 austenitic stainless steels
2020, vol. 27, no. 11, pp. 1517-1524. doi: 10.1007/s12613-020-2001-8
-
Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C
2020, vol. 27, no. 11, pp. 1536-1550. doi: 10.1007/s12613-020-2014-3
-
Investigation of secondary phases and tensile strength of nitrogen-containing Alloy 718 weldment
2020, vol. 27, no. 9, pp. 1259-1268. doi: 10.1007/s12613-020-2013-4
-
-
Ultrasonic vibration assisted tungsten inert gas welding of dissimilar metals 316L and L415
2020, vol. 27, no. 7, pp. 943-953. doi: 10.1007/s12613-019-1960-0
-
Liquation cracking in the heat-affected zone of IN939 superalloy tungsten inert gas weldments
2020, vol. 27, no. 6, pp. 764-773. doi: 10.1007/s12613-019-1954-y
-
Stress-corrosion behavior and characteristics of the friction stir welding of an AA2198-T34 alloy
2020, vol. 27, no. 6, pp. 774-782. doi: 10.1007/s12613-019-1924-4
-
Microstructural analyses of aluminum–magnesium–silicon alloys welded by pulsed Nd: YAG laser welding
2020, vol. 27, no. 5, pp. 660-668. doi: 10.1007/s12613-020-2027-y
-
-
Characterizations of dissimilar S32205/316L welds using austenitic, super-austenitic and super-duplex filler metals
2020, vol. 27, no. 1, pp. 119-127. doi: 10.1007/s12613-019-1925-3
-
Effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of Mg and Al alloys
2019, vol. 26, no. 10, pp. 1285-1298. doi: 10.1007/s12613-019-1834-5
-
Effects of postweld aging on the microstructure and properties of bobbin tool friction stir-welded 6082-T6 aluminum alloy
2019, vol. 26, no. 7, pp. 849-857. doi: 10.1007/s12613-019-1800-2
-
-
Microstructure, mechanical properties and formability of friction stir welded dissimilar materials of IF-steel and 6061 Al alloy
2019, vol. 26, no. 6, pp. 722-731. doi: 10.1007/s12613-019-1783-z
-
Friction stir welding of pure magnesium and polypropylene in a lap-joint configuration:Microstructure and mechanical properties
2019, vol. 26, no. 6, pp. 766-774. doi: 10.1007/s12613-019-1784-y
-
-
-
Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding
2019, vol. 26, no. 2, pp. 251-259. doi: 10.1007/s12613-019-1730-z
-
-
Microstructure and mechanical properties of friction-stir welded St52 steel joints
2018, vol. 25, no. 12, pp. 1457-1464. doi: 10.1007/s12613-018-1700-x
-
Microstructural evolution and mechanical properties of friction stir-welded C71000 copper-nickel alloy and 304 austenitic stainless steel
2018, vol. 25, no. 11, pp. 1294-1303. doi: 10.1007/s12613-018-1682-8
-
Development of a new coated electrode with low nickel content for welding ductile iron and its response to austempering
2018, vol. 25, no. 9, pp. 1090-1103. doi: 10.1007/s12613-018-1660-1
-
Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer
2018, vol. 25, no. 8, pp. 967-973. doi: 10.1007/s12613-018-1646-z