Virtual Issue on Corrosion (2018–2020)
-
Erosion-corrosion and its mitigation on the internal surface of the expansion segment of N80 steel tube
2021, vol. 28, no. 1, pp. 98-110. doi: 10.1007/s12613-020-2086-0
-
In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications
2021, vol. 28, no. 1, pp. 168-178. doi: 10.1007/s12613-020-2072-6
-
Corrosion behavior of cold-rolled and post heat-treated 316L stainless steel in 0.9wt% NaCl solution
, Available online 3 April 2020 , doi: 10.1007/s12613-020-2054-8
-
Effect of large load on the wear and corrosion behavior of high-strength EH47 hull steel in 3.5wt% NaCl solution with sand
2020, vol. 27, no. 11, pp. 1525-1535. doi: 10.1007/s12613-020-1978-3
-
Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C
2020, vol. 27, no. 11, pp. 1536-1550. doi: 10.1007/s12613-020-2014-3
-
-
Protein adsorption, cell viability and corrosion properties of Ti6Al4V alloy treated by plasma oxidation and anodic oxidation
2020, vol. 27, no. 9, pp. 1269-1280. doi: 10.1007/s12613-020-2020-5
-
-
Comparative study of mechanical, corrosion and erosion−corrosion properties of cast hyper-duplex and super-duplex stainless steels
2020, vol. 27, no. 7, pp. 954-961. doi: 10.1007/s12613-020-1984-5
-
Stress-corrosion behavior and characteristics of the friction stir welding of an AA2198-T34 alloy
2020, vol. 27, no. 6, pp. 774-782. doi: 10.1007/s12613-019-1924-4
-
Electrodeposition of functionally graded Ni−W/Er2O3 rare earth nanoparticle composite film
2020, vol. 27, no. 6, pp. 818-829. doi: 10.1007/s12613-019-1953-z
-
-
Chloride resistance of Cr-bearing alloy steels in carbonated concrete pore solutions
2020, vol. 27, no. 4, pp. 494-504. doi: 10.1007/s12613-019-1920-8
-
Influence of glycine additive on corrosion and wear performance of electroplated trivalent chromium coating
2020, vol. 27, no. 4, pp. 544-554. doi: 10.1007/s12613-020-1975-6
-
Effect of cooling temperature on the microstructure and corrosion behavior of X80 pipeline steel
2020, vol. 27, no. 3, pp. 347-353. doi: 10.1007/s12613-019-1882-x
-
-
-
-
Characterization and corrosion studies of ternary Zn–Ni–Sn alloys
2020, vol. 27, no. 1, pp. 74-82. doi: 10.1007/s12613-019-1888-4
-
-
Ordering and disordering of in situ grown MgAl-layered double hydroxide and its effect on the structural and corrosion resistance properties
2019, vol. 26, no. 12, pp. 1570-1577. doi: 10.1007/s12613-019-1844-3
-
Corrosion mechanism of magnesia-chromite refractories by ZnO-containing fayalite slags: Effect of funnel glass addition
2019, vol. 26, no. 12, pp. 1604-1616. doi: 10.1007/s12613-019-1912-8
-
Cathodic reaction mechanisms in CO2 corrosion of low-Cr steels
2019, vol. 26, no. 11, pp. 1405-1414. doi: 10.1007/s12613-019-1861-2
-
Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel
2019, vol. 26, no. 11, pp. 1415-1426. doi: 10.1007/s12613-019-1825-6
-
Microstructure, mechanical, and corrosion properties of extruded low-alloyed Mg–xZn–0.2Ca alloys
2019, vol. 26, no. 10, pp. 1274-1284. doi: 10.1007/s12613-019-1860-3
-
Electroplating of Ni/Co–pumice multilayer nanocomposite coatings: Effect of current density on crystal texture transformations and corrosion behavior
2019, vol. 26, no. 10, pp. 1299-1310. doi: 10.1007/s12613-019-1833-6
-
Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process
2019, vol. 26, no. 10, pp. 1311-1321. doi: 10.1007/s12613-019-1836-3
-
-
-
Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys
2019, vol. 26, no. 7, pp. 858-868. doi: 10.1007/s12613-019-1801-1
-
Effects of Ta on the solidification behavior and microstructure of a rhenium-containing hot corrosion resistant single crystal
2019, vol. 26, no. 7, pp. 901-907. doi: 10.1007/s12613-019-1817-6
-
-
Atomic modeling for the initial stage of chromium passivation
2019, vol. 26, no. 6, pp. 732-739. doi: 10.1007/s12613-019-1803-z
-
Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media
2019, vol. 26, no. 4, pp. 467-482. doi: 10.1007/s12613-019-1754-4
-
Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting
2019, vol. 26, no. 3, pp. 319-328. doi: 10.1007/s12613-019-1740-x
-
Passivity breakdown of 13Cr stainless steel under high chloride and CO2 environment
2019, vol. 26, no. 3, pp. 329-336. doi: 10.1007/s12613-019-1741-9
-
Hot-corrosion behavior of Cr2O3-CNT-coated ASTM-SA213-T22 steel in a molten salt environment at 700℃
2019, vol. 26, no. 3, pp. 337-344. doi: 10.1007/s12613-019-1742-8
-
Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing
2019, vol. 26, no. 2, pp. 202-209. doi: 10.1007/s12613-019-1725-9
-
Effect of pre-recovery on microstructure and properties of rolled Al-12.18Zn-3.31Mg-1.43Cu-0.20Zr-0.04Sr aluminum alloy
2019, vol. 26, no. 2, pp. 241-250. doi: 10.1007/s12613-019-1729-5
-
Azole derivatives embedded in montmorillonite clay nanocarriers as corrosion inhibitors of mild steel
2019, vol. 26, no. 1, pp. 86-97. doi: 10.1007/s12613-019-1712-1
-
-
Prediction model for atmospheric corrosion of 7005-T4 aluminum alloy in industrial and marine environments
2018, vol. 25, no. 11, pp. 1313-1319. doi: 10.1007/s12613-018-1684-6
-
Effect of Al2O3 and Y2O3 on the corrosion behavior of ZrO2-benzotriazole nanostructured coatings applied on AA2024 via a sol-gel method
2018, vol. 25, no. 11, pp. 1344-1353. doi: 10.1007/s12613-018-1688-2
-
Microstructure and electrolysis behavior of self-healing Cu-Ni-Fe composite inert anodes for aluminum electrowinning
2018, vol. 25, no. 10, pp. 1208-1216. doi: 10.1007/s12613-018-1673-9
-
Improvement of microstructure and corrosion properties of friction stir welded AA5754 by adding Zn interlayer
2018, vol. 25, no. 8, pp. 967-973. doi: 10.1007/s12613-018-1646-z
-
Flow-accelerated corrosion behavior of 13Cr stainless steel in a wet gas environment containing CO2
2018, vol. 25, no. 7, pp. 779-787. doi: 10.1007/s12613-018-1626-3
-
Microstructure and corrosion behavior of Al3Ti/ADC12 composite modified with Sr
2018, vol. 25, no. 7, pp. 840-848. doi: 10.1007/s12613-018-1633-4
-
Effect of cold rolling on the microstructural, magnetic, mechanical, and corrosion properties of AISI 316L austenitic stainless steel
2018, vol. 25, no. 6, pp. 630-640. doi: 10.1007/s12613-018-1610-y
-
Wear and corrosion resistance of laser-cladded Fe-based composite coatings on AISI 4130 steel
2018, vol. 25, no. 6, pp. 716-728. doi: 10.1007/s12613-018-1619-2
-
Corrosion behavior of high-strength spring steel for high-speed railway
2018, vol. 25, no. 5, pp. 527-535. doi: 10.1007/s12613-018-1599-2