Virtual Issue on Steelmaking (2018–2020)
-
Review on desulfurization in electroslag remelting
2021, vol. 28, no. 1, pp. 18-29. doi: 10.1007/s12613-020-2075-3
-
Behavior of phosphorus enrichment in dephosphorization slag at low temperature and low basicity
2021, vol. 28, no. 1, pp. 66-75. doi: 10.1007/s12613-020-2036-x
-
A review of carbon dioxide disposal technology in the converter steelmaking process
2020, vol. 27, no. 11, pp. 1421-1429. doi: 10.1007/s12613-020-2065-5
-
Distribution characteristics of inclusions along with the surface sliver defect on the exposed panel of automobile: A quantitative electrolysis method
2020, vol. 27, no. 11, pp. 1489-1498. doi: 10.1007/s12613-020-1973-8
-
Effect of calcium content on inclusions during the ladle furnace refining process of AISI 321 stainless steel
2020, vol. 27, no. 11, pp. 1499-1507. doi: 10.1007/s12613-020-1981-8
-
Temperature-dependent evolution of oxide inclusions during heat treatment of stainless steel with yttrium addition
2020, vol. 27, no. 6, pp. 754-763. doi: 10.1007/s12613-019-1935-1
-
Reaction mechanisms between molten CaF2-based slags and molten 9CrMoCoB steel
2020, vol. 27, no. 5, pp. 611-619. doi: 10.1007/s12613-020-1976-5
-
Model prediction of the effect of in-mold electromagnetic stirring on negative segregation under bloom surface
2020, vol. 27, no. 3, pp. 319-327. doi: 10.1007/s12613-019-1906-6
-
-
Characteristics of a coherent jet enshrouded in a supersonic fuel gas
2020, vol. 27, no. 2, pp. 173-180. doi: 10.1007/s12613-019-1928-0
-
Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process
2019, vol. 26, no. 11, pp. 1372-1384. doi: 10.1007/s12613-019-1871-0
-
Gas-liquid mass transfer and flow phenomena in a peirce-smith converter: A numerical model study
2019, vol. 26, no. 9, pp. 1092-1104. doi: 10.1007/s12613-019-1831-8
-
Carbon and oxygen behavior in the RH degasser with carbon powder addition
2019, vol. 26, no. 6, pp. 681-688. doi: 10.1007/s12613-019-1782-0
-
Effect of CeO2 on heat transfer and crystallization behavior of rare earth alloy steel mold fluxes
2019, vol. 26, no. 5, pp. 565-572. doi: 10.1007/s12613-019-1765-1
-
Influence of metallurgical processing parameters on defects in cold-rolled steel sheet caused by inclusions
2019, vol. 26, no. 4, pp. 440-446. doi: 10.1007/s12613-019-1751-7
-
Effect of continuous casting speed on mold surface flow and the related near-surface distribution of non-metallic inclusions
2019, vol. 26, no. 2, pp. 186-193. doi: 10.1007/s12613-019-1723-y
-
-
Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining
2018, vol. 25, no. 8, pp. 881-891. doi: 10.1007/s12613-018-1637-0
-
Investigation of the kinetic mechanism of the demanganization reaction between carbon-saturated liquid iron and CaF2-CaO-SiO2-based slags
2018, vol. 25, no. 4, pp. 399-404. doi: 10.1007/s12613-018-1584-9
-
-
Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process
2018, vol. 25, no. 2, pp. 153-163. doi: 10.1007/s12613-018-1558-y
-
Gas-liquid mass transfer and flow phenomena in the Peirce-Smith converter: a water model study
2018, vol. 25, no. 1, pp. 37-44. doi: 10.1007/s12613-018-1544-4